Automatic Pool Cleaner Vacuum w/ 10M Hose
Enjoy the fun of your swimming pool with an automatic pool cleaner and never worry about the pool again! Why spend hours cleaning your pool when this smart automatic pool cleaner can do it all for you?
This above ground / in ground automatic pool cleaner is very easy to use, It can be installed in minutes without tools and it cleans the pool bottoms and walls thoroughly. Simply assemble the disc and hoses, attach them to your pool pump and start vacuuming! It sucks up dirt, debris, bugs, twigs, leaves, sand, and even pebbles! It cleans up walls with its bumper fin and anti-stick design to ensure maximum coverage, leaving you with a completely clean pool.
With the Diaphragm as used means quiet cleaning with no “ticking” noise, with a single moving part means superior performance and longevity! The Kit also includes 10 Meters of heavy duty PU hose for those large pools, a full skimmer fittings kit with various adapters and full instructions. Large debris is not a problem unlike the “hammer” type that becomes easily clogged and damaged by sticks, stones and leaves.
By turning the snob of the speed regulator, you are free to adjust the suction power of the cleaner. Suitable for any above ground pools except inflatable pools, it works efficiently and economically - the best pool cleaner you could ever ask for
- Automatic pool cleaning system
- Suitable for above ground and in-ground pools (but not with splash pools)
- Powered by your existing filtration system - a pump of minimum 1 hp
- Automatic Speed regulator to adjust suction power
- Anti-stick design
- Unique heavy duty rotation foot
- Long Hose length for all pools
- Male end: 36mm, Female end: 38mm
- Easy installation without tools
- Assembly less than 15 minutes
- Suitable for ALL Above Ground and in Ground Pools - Concrete, Pebblecrete, Quartzon, Tile, Fibreglass and Vinyl Surfaces
- Please ensure adequate suction is available to run cleaner.
- Pool cleaner size: 45 x 47 x 31 cm
- Hose: Male end: 36mm, Female end: 38mm
- Hose length: 10m
- Pump required of minimum 1 Hp
- 1 x Pool Cleaner (Skirt and Wearing Sole included)
- 10m Heavy Duty PU Hose
- 1 x Instruction Guide 1 x Skimmer Fittings Pack: Elbows, Flow Regulator Valve, Hose Weight
Please ensure your filtration system is adequate for a suction cleaner as returns of this product will not be accepted because of inadequate filtration equipment.
We recommend a minimum 1HP pool pump, and a CLEAN cartridge filter to ensure optimum operation